Interface Description; Overview - Siemens SINAMICS S120 Combi Equipment Manual

Accessories
11.1 DRIVE-CLiQ cabinet bushing
11.1.2

Interface description

11.1.2.1

Overview

DRIVE-CLiQ cabinet bushing for DRIVE-CLiQ cables with DRIVE-CLiQ connectors
①
②
③
④
⑤
Figure 11-1
DRIVE-CLiQ cabinet bushing for DRIVE-CLiQ cables with M12 plug/socket
①
②
③
④
⑤
Figure 11-2
280
Protective cap, Yamaichi, Article No.: Y-ConAS-24-S
DRIVE-CLiQ interface on the outside (to connect DRIVE-CLiQ signal cables MOTION-
CONNECT with IP67 degree of protection)
Mounting holes
Flange-type seal to ensure degree of protection IP54 on the outside of the cabinet
DRIVE-CLiQ interface on the inside (to connect DRIVE-CLiQ signal cables MOTION-
CONNECT with IP20 degree of protection)
Interface overview, DRIVE-CLiQ cabinet bushing
DRIVE-CLiQ interface with M12 socket (8-pin)
Flange, SW18
Seal
DRIVE-CLiQ interface with M12 plug (8-pin)
O ring, SW20, tightening torque: 3-4 Nm
Interface overview, DRIVE-CLiQ cabinet bushing M12
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5