X524 Electronics Power Supply - Siemens SINAMICS S120 Combi Equipment Manual

Additional system components
9.1 Terminal Module TM54F
9.1.3.8

X524 Electronics power supply

Table 9- 8 Terminals for the electronics power supply
Terminal
+
+
M
M
The maximum cable length that can be connected is 10 m.
Note
The two "+" and "M" terminals are jumpered in the connector. This ensures that the supply
voltage is looped through.
The current consumption increases by the value for the DRIVE-CLiQ node.
210
Designation
Electronics power supply
Electronics power supply
Electronics ground
Electronics ground
Technical data
Voltage: 24 V DC (20.4 ... 28.8 V)
Current consumption: Max. 0.7 A
Max. current via jumper in connector: 20 A (15 A ac-
cording to UL/CSA)
Type: Screw terminal 3 (Page 307)
Max. connectable cross-section: 2.5 mm²
Tightening torque: 0.4 ... 0.5 Nm
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
SINAMICS S120 Combi