Electrically connecting Motor Modules and DC link components
8.3 Connection of DC link busbars and 24 V busbars
8.3
Connection of DC link busbars and 24 V busbars
The following steps are necessary to connect a component to the DC link and the 24 V
busbars of the S120 Combi:
1. Use a suitable screwdriver or tool from the accessories pack to open the protective cover
of the component which is to be connected.
2. Remove the DC link side cover at the connection location.
Figure 8-1
196
S120 Combi and Motor Module without DC link covers
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5