Making The Waste Water Connection - Henny Penny FlexFusion ELECTRIC SPACESAVER PLUS FSE-610 Installation Manual

6.6 Making the waste water connection

5. Connect the connection line for softened drinking water to the T-
piece using a seal.
6. Open the drinking water tap and check the threaded fittings for
leakage tightness.
7. Fill out the Start-up operation report.
a b
c
d
e
Image: Connecting softened drinking water at two locations
a Drinking water connection
b Softened drinking water
connection
c Dirt filter
Waste water installation tasks
Waste water installation tasks on waste water systems and the unit
may only be carried out by a specialized company that is responsible
for waste water systems. The applicable regional regulations,
standards and guidelines must be observed, as well as the
connection conditions imposed by the operator of the waste water
company responsible.
Technical qualifications for waste water installation tasks
Waste water installation tasks on waste water lines and the unit may
be carried out only by a waste water specialist provided by the
specialist company contracted.
Installation instructions
Connecting the unit
d T-piece
e Seal
35