Setting Up The Unit On A Work Surface Or Underframe; Attaching The Insertion Height Warning Note; Installing The Hang-In Frame - Henny Penny FlexFusion ELECTRIC SPACESAVER PLUS FSE-610 Installation Manual

5.2 Setting up the unit on a work surface or underframe

CAUTION
Prerequisite Work surface/underframe must support the weight of the unit

5.2.1 Attaching the insertion height warning note

CAUTION

5.2.2 Installing the hang-in frame

Danger due to heavy weight of the unit (over 60 kg)
• Erect the unit with several people.
• Raise / lower the unit with suitable lifting equipment.
Work surface/underframe must be level
Subframe installed in accordance with planning drawing
1. Lift unit.
2. Place unit on work surface or the upright bolts of the underframe.
Risk of scalding due to spillage of hot cooked food
• Attach stickers if the upper insertion rails are higher than 1,6 m (5,3 ft).
Image: Attaching the insertion height warning note
1. Clean the adhesive surface for the sticker.
2. Attach the sticker to the cooking chamber door at the height of the
1,6 m (5,3 ft).
Depending on the version, the base frame can be equipped with a
hang-in frame.
The hang-in the frame is used to hold containers, baking sheets and
grates.
Installation instructions
Installing the unit
19