Connecting The Potential Equalization; Connecting The Kitchen Guiding System - Henny Penny FlexFusion ELECTRIC SPACESAVER PLUS FSE-610 Installation Manual

6.2.3 Connecting the potential equalization

6.3 Connecting the kitchen guiding system

3. Guide connection cable into the unit through the threaded cable
connection.
4. Route connection line to the connection terminals parallel to the
electrical connection line.
5. Connect connection cable in accordance with the circuit diagram.
6. Secure connection cable with cable tie.
7. Tighten threaded cable connection to provide strain relief.
8. Close housing.
9. Log on to power optimization system in basic control setting (see
"Establishing the basic control setting").
10.Complete the start-up operation report.
Image: Connecting the potential equalization
1. Route and connect the potential equalization line to the marked
connection.
2. Fill out the Start-up operation report.
The units can be connected to a kitchen guiding system using an
RJ45 plug.
Minimum requirements for the network cable
Type of network
Cable quality
Connection to unit
a
b
c
Image: Connecting the kitchen guiding system
a RJ45 socket
b RJ45 connector
1. Connect the network cable to the RJ45 connector on the unit.
Installation instructions
Connecting the unit
Ethernet
4-pair shrouded patch cable
Cat-5 S/FTP
Shrouded RJ45 connector
c Network cable
31