Installing the unit
Prerequisite Pins installed in the uprights of the base frame
5.3 Fastening the unit to the floor
5.3.1 Securing the unit to prevent tipping
WARNING
20
A
a
Image: A Stop profile, B Hang-in frame
a Stop profile
b Bolt
1. Place the stop profiles on the pins (at the back).
2. Install the support racks.
Risk of accident from insufficient fastening
Unit can tip over
• Depending on the unit type, suitable measures must be taken to fasten the
unit to the floor.
• Comply with the requirements for the condition of the floor.
• Comply with the requirements for the means of fastening.
• Follow the manufacturer's instructions for using the means of fastening.
Depending on the size, it is essential that certain combisteamer types
or combisteamers used in combination with a Stapelkit (stacking kit), a
recirculation hood, an underframe or base cabinet be secured to
prevent tipping.
Unit types that must be secured to prevent tipping (see "Unit and
connection data").
Installation instructions
B
b
c
c Hang-in frame
c