Henny Penny FlexFusion ELECTRIC SPACESAVER PLUS FSE-610 Installation Manual page 40
Hide thumbs
Also See for FlexFusion ELECTRIC SPACESAVER PLUS FSE-610:
- Installation instructions manual (48 pages) ,
- Operating instructions manual (80 pages) ,
- Service instructions manual (72 pages)
Table of Contents
Advertisement
Testing the function
40
3. Run the unit in the Steaming mode for 15 minutes at 100 °C (212°F).
4. Rinse the cooking chamber thoroughly with clear water.
5. Run the unit in the hot air mode for 5 minutes at 180 °C (356°F).
6. Open the cooking chamber door and leave it ajar until the unit is
used again.
7. Fill out the start-up operation report.
Installation instructions
Advertisement
Table of Contents
