Henny Penny FlexFusion ELECTRIC SPACESAVER PLUS FSE-610 Installation Manual page 42

Putting the unit into service
Obvious damage to the unit?
What and where?:
Unit levelled?
Unit fastened to floor?
secured against tipping
Screwed to floor
Glued to floor
Electrical connection made properly?
Potential equalization
Potential-free contact
Electrical connections made properly?
Fault current device connected directly before this unit?
Fault current device connected before this and other units?
Kitchen guiding system connected properly?
Temperature unit set?
°C
Date and time set?
Software version identified?
Version:
Altitude set?
0 — 999 m (3277 ft)
2000 m (6560 ft) — 2499 m (8197 ft)
80% power set?
100 %
Supply voltage set?
Voltage:
Audible signal volume set?
Low
Signal tone selected?
42
General information
General information
secured against shifting
Screwed to floor
Glued to floor
Electrical connection
Power optimization system
Kitchen guiding system
Basic setting of the control
°F
1000 m (3280 ft) — 1999 m (6557 ft)
2500 m (8200 ft) or higher
80 %
V
High
Installation instructions
Yes No
Yes No
Yes No
Yes No
Yes No