Henny Penny FlexFusion ELECTRIC SPACESAVER PLUS FSE-610 Installation Manual page 41

9 Putting the unit into service
INFORMATION
Prerequisite Electrical connection made
9.1 Nameplate
9.2 Filling out the Start-up operation report
Information from the nameplate entered?
SN:
E:
Bez:
Item-Nr.:
If the unit is not put into service immediately after being connected and the
function check, all inspections must be repeated.
Water connection made
Wastewater connection made
Exhaust air connection made ​ ​ ( if required by the customer)
Function checked successfully
Housing closed
1. Instruct operator.
2. Fill out the Start-up operation report.
a b
MKN Maschinenfabrik Kurt Neubauer GmbH & Co. KG, Halberstädter Str. 2a, D-38300 Wolfenbüttel
www.mkn.com
Image: Nameplate information
a Manufacturer
b CE mark
c Electrical connected load
d Serial number
e Equipment abbreviation
f Type number
g Equipment designation
h Item number
General information
Typ:
(if listed)
Installation instructions
Putting the unit into service
g
c d e f
Typ:
SN: Item-Nr.:
Bez.:
m:
 
o n m l k
i Frequency
j Barcode
k Country of destination
l Type of connection
m Protection class
n Barcode
o Weight
h
j i
Yes No
41