Data Aire dap4 User Manual page 78

MENU M – Set Zone Master (continued)
The holiday schedule allows you to set a span of one or more days to run
the schedule selected: Primary or Secondary. Up to 4 holiday schedules
may be set. While running a holiday schedule, it supersedes the weekday
schedule. If a span of only one day is needed, consider using the special day
scheduler described next.
Start – Choose the day and month to start the holiday.
Stop – Choose the day and month to end the holiday.
Setting – Choose which schedule will run during the holiday.
When the clock reaches the selected start day (at 12:00 midnight) the
schedule that is selected will run. When the clock reaches the selected stop
day (at 12:00 midnight) the holiday schedule will end and the normal
weekday schedule will take over.
When (------) is shown, no holiday schedule is set.
This screen will only appear on the Master controller (Unit #1).
The special day schedule is like the Holiday schedule except it is limited to
just one day that will run the schedule selected: Primary or Secondary.
When a special day schedule is set, it supersedes the weekday schedule.
















78