Data Aire dap4 User Manual page 56

MENU J – FACTORY SETTINGS (factory level) continued
The selections on this screen are performed at the factory and should never be
changed. These settings are displayed in the information menu and are useful for
technical support.
Language: Selections are: English (default), Portuguese, French and Spanish.
Import DEV File? When set to "Yes", the controller will accept a DEV (a file
containing all current settings) to be uploaded so it will be a copy of that controller.
Note: Use of this feature will remove the Zone Master and/or Airside Economizer
password keys from this controller. Please consult Data Aire service department
for the procedure to use this feature.
Clear user settings and replace them with factory defaults? When set to "Yes"
and entered, the message "Please Wait Resetting" will appear while all settings
return to their original default value. A screen will then appear that reads "Please
cycle power to begin execution". After the power is cycled, the program will begin
running with the default values.
Important Notice – This function should only be used by qualified
technicians. All menu settings should be recorded so that they can be
restored.















56