Table of Contents
Advertisement
6.3
Connecting PROFINET and PROFIBUS fieldbus
Connecting PROFINET
CIM PROFINET connection X1 / X2
Connecting PROFIBUS / setting PROFIBUS address
CIM PROFIBUS connection X1
6.4
Connect 24 V DC power supply
Power is supplied to the Central Interface Module (CIM) and EM4315 expansion module via
an external 24 V DC supply. Use a power supply unit which conforms to IEC 60536,
protection class III (PELV). Power supply units from the SITOP product line are suitable, for
example.
The CIM and the EM4315 can both also supply up to 8 POM4320 or 6 POM4320 Highend
via the HCS system interface.
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
6.3 Connecting PROFINET and PROFIBUS fieldbus
Connect X1 / X2 to the higher-level controller and/or the next
PROFINET device using an Ethernet cable according to the
PROFINET specification.
Use shielded Ethernet cables for this purpose.
The PROFIBUS address is assigned using the S1 / S2 address
•
selector switches. Addresses can be set from 0 to 99.
Connect X1 to the higher-level controller and/or the next
•
PROFIBUS device via cable in accordance with the PROFIBUS
specification.
Wiring
55
Advertisement
Table of Contents
