Table of Contents
Advertisement
VistaKey Installation Guide
↓ VISTA Card ID Number
001 Trace?
NOT ENABLED
ACS GRP? 1 2 3 4 5 6 7 8
HIT 0-8
6–12
cardholder's access group is enabled via scheduling or whether his
access group is enabled to enter or exit through any of the access
points. The only reason that a cardholder with executive privilege is
prevented from gaining access through an access point would be if
his card has expired via usage or date. Disabling Executive
Privilege allows cardholders entry through access points only if the
following conditions exist:
• The access point has been programmed to accept the cardholder's
access group.
• The cardholder's access group is enabled at the time of the card
swipe (via scheduling, event/action or action selector), PIN entry
(code + # + 73), or RF button remote depression.
• The cardholder's card has not expired.
Press 1 to provide the cardholder with executive privileges, or 0 for
no executive privileges.
NOTE: It the card belongs to an access group that has executive
privilege enabled, this feature can be inherited from the access
group; however, only executive privilege assigned to a card will be
accepted when the VistaKey is operating in RCM.
Press [ ] to accept the entry.
The Trace feature allows the cardholder to be monitored by logging
his entry/exit grants and denials in the log and (if programmed)
0
dialing out and sending a report to central station. Note that a card
may also inherit a trace enable from its access group assignment. A
card is traced if any access group that it is assigned to has trace
enabled.
NOTE: If a card has expired (from number of uses or date) and trace
is enabled, any attempt to use the card will be logged and dial out (if
enabled) as user U999. When a card expires, it remains in the
database so that it may be reinstated if desired.
Press 1 to trace the cardholder, or 0 for no trace.
Press [ ] to accept the entry.
Each cardholder must belong to at least one access group. The
x x x x x x x x
access group provides the cardholder with certain privileges
afforded to all cardholders that belong to that access group. If a
cardholder belongs to more than one access group, he is afforded all
the privileges of all the access groups he belongs to. The access
groups also determine which access point(s) the cardholder has
access to and at what times according to the schedule his access
group is enabled.
Press 0 to toggle all access groups on or off; or press keys 1-8 to
toggle the letter "x" under the access group numbers on or off.
Press [ ] to accept the entry.
NOTE: Numbers toggle. For example, pressing 1 turns group 1 on,
and pressing 1 again turns group 1 off.
Hide quick links:
Advertisement
Table of Contents
