Table of Contents
Advertisement
VistaKey Installation Guide
↓ VISTA Card ID Number
001 Trace?
NOT ENABLED
ACS GRP? 1 2 3 4 5 6 7 8
HIT 0-8
↓ VISTA Card ID Number
001 Expire use?
UNLIMITED USE
6–8
NOTE: It the card belongs to an access group that has executive
privilege enabled, this feature can be inherited from the access
group; however, only executive privilege assigned to a card will be
accepted when the VistaKey is operating in RCM.
Press [ ] to accept the entry.
The Trace feature allows the cardholder to be monitored by logging
his entry/exit grants and denials in the log and (if programmed)
0
dialing out and sending a report to central station. Note that a card
may also inherit a trace enable from its access group assignment. A
card is traced if any access group that it is assigned to has trace
enabled.
NOTE: If a card has expired (from number of uses or date) and trace
is enabled, any attempt to use the card will be logged and dial out (if
enabled) as user U999. When a card expires, it remains in the
database so that it may be reinstated if desired.
Enter 1 to trace the cardholder, or 0 for no trace.
Press [ ] to accept the entry.
Each cardholder must belong to at least one access group. The
access group provides the cardholder with certain privileges
afforded to all cardholders that belong to that access group. If a
cardholder belongs to more than one access group, he is afforded all
the privileges of all the access groups he belongs to. The access
groups also determine which access point(s) the cardholder has
access to and at what times according to the schedule his access
group is enabled.
Press 0 to toggle all access groups on or off; or press keys 1-8 to
toggle the letter "x" under the access group numbers on or off.
Press [ ] to accept the entry.
NOTE: Numbers toggle. For example, pressing 1 turns group 1 on
and pressing 1 again turns group 1 off.
"Expire use" defines whether the cardholder access privileges are to
expire with usage. Enter 00 for unlimited use. Otherwise, enter a
00
number between 01 and 14. Entering a number between 01 and 14
allows that many entry access grants for this cardholder. Egress
grants have no effect on the usage count. Entering 15 automatically
expires the card and no entry grants are permitted even if the
cardholder has executive privilege. Expiring a card will NOT delete
it from the card database; the card retains its card ID#.
NOTE: If you set a card to expire with use and also set the same
card to expire by time ("Expire Month" below), then the card will
expire on the first event to occur.
Enter a number from 00 to 15.
Press [ ] to accept the entry.
Hide quick links:
Advertisement
Table of Contents
