Table of Contents
Advertisement
VistaKey Installation Guide
ACCESS
GROUP
1
2
3
4
5
Access Points
Description
This portion of step 3 defines which access points (doors) each group will have permission to
enter by swiping their valid card at the respective proximity reader.
How this feature is used in our example
This is where we assign access point(s) privileges to each group. Notice that Executive
Officers are permitted access through every door in the system, but Factory Workers may
only access the lobby door and entry door leading to the factory (points 1 and 3).
Where to program
Program access points in the menu-driven programming mode *93 of the VISTA Panel. See
Setting Up Access Groups in Section 5: Programming later in this guide.
2–4
CARDHOLDERS
GROUP
Executive Officers a. Can access all access points.
b. Can disarm/arm all partitions.
c. Have access 24 hours a day, 7 days
a week.
d. Valid card swipe automatically
disarms respective partition.
Office Managers
a. Can access points 1 and 2 during
time schedule while partitions are
armed or disarmed.
b. Valid card swipe automatically
disarms partitions 1 and 2.
c. Cannot access point 3 or disarm/arm
partition 3.
Office Workers
a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 2 only while
disarmed and during time schedule.
Cannot arm/disarm partition 2.
d. Cannot access point 3 or arm/disarm
partition 3.
Factory Managers a. Can access points 1 and 3 during
time schedule while partitions armed
or disarmed.
b. Valid card swipe automatically
disarms partitions 1 and 3.
c. Cannot access point 2 or disarm/arm
partition 2.
Factory Workers
a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 3 only while
disarmed and during time schedule.
Cannot arm/disarm partition 3.
d. Cannot access point 2 or arm/disarm
partition 2.
PRIVILEGES
Hide quick links:
Advertisement
Table of Contents
