Executive Privilege; Description; How This Feature Is Used In Our Example; Where To Program - ADEMCO VistaKey-SK Installation & Setup Manual

Single-door access control starter kit
Hide thumbs Also See for VistaKey-SK:
Table of Contents

Advertisement

ACCESS
CARDHOLDERS
GROUP
GROUP
1
Executive Officers a. Can access all access points.
2
Office Managers
3
Office Workers
4
Factory Managers a. Can access points 1 and 3 during
5
Factory Workers

Executive Privilege

Description

Executive Privilege allows a cardholder to access any door in the entire system 24 hours a
day, 7 days a week, and gives that card user the ability to automatically disarm any armed
partition with a valid card swipe. Executive privilege (status) can be assigned to an
individual card user or a group of card users (as in our example system).

How this feature is used in our example

The Officers access group has been assigned Executive Privilege, which permits any of the
Officer cardholders to access any door in the system 24 hours a day, and gives them the
ability to disarm any armed partition by simply swiping their valid card at any reader.

Where to program

In the VISTA control panel's menu-driven programming mode *93, enable or disable
Executive Privilege. See Setting Up Access Groups in Section 5: Programming later in this
guide.
PRIVILEGES
b. Can disarm/arm all partitions.
c. Have access 24 hours a day, 7 days
a week.
d. Valid card swipe automatically
disarms respective partition.
a. Can access points 1 and 2 during
time schedule while partitions are
armed or disarmed.
b. Valid card swipe automatically
disarms partitions 1 and 2.
c. Cannot access point 3 or disarm/arm
partition 3.
a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 2 only while
disarmed and during time schedule.
Cannot arm/disarm partition 2.
d. Cannot access point 3 or arm/disarm
partition 3.
time schedule while partitions armed
or disarmed.
b. Valid card swipe automatically
disarms partitions 1 and 3.
c. Cannot access point 2 or disarm/arm
partition 2.
a. Can access point 1 and arm/disarm
partition 1 during time schedule.
b. Valid card swipe automatically
disarms partition 1.
c. Can access point 3 only while
disarmed and during time schedule.
Cannot arm/disarm partition 3.
d. Cannot access point 2 or arm/disarm
partition 2.
Section 2 – Access Control Integration
ACCESS POINTS
1
2
3
X
X
X
X
X
X
X
X
X
X
X
2–5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents