Mapping Vistakey Zones To Panel Zones - ADEMCO VistaKey-SK Installation & Setup Manual

VistaKey Installation Guide
EVENT EVENT
NO. NAME
Access Point (AP) Specifiers (cont'd)
33 Force Opn
34 Force Rst
Zone Number Specifiers
35 Fire Zn
36 Fire Rst Zn
37 Burg Zn
38 Burg Rst Zn
39 Alm Zn
40 Alm Rst Zn
41 Trb Zn
42 Tble Rst Zn
43 Byp Zn
44 Byp Rst Zn
Arming Specifiers
45 Arm Stay Ptn
46 Arm Away Ptn
47 Arm Inst Ptn
48 Arm Max Ptn
49 Arm Stay Usr
50 Arm Away Usr
51 Arm Inst Usr
52 Arm Max Usr

Mapping VistaKey Zones to Panel Zones

You will be dealing with four zone types when mapping VistaKey zones to panel zones. As an
aid to understanding the programming steps required, a brief description of these four zone
types follows:
• DSM – This zone type is used to map an access point to a zone and is used to monitor the
status of an access point (e.g., open, closed). When the access point is bypassed, the
controlled door is propped, or the controlled door is forced, the DSM operates according to
the zone response type. The DSM device is normally a magnetic switch mounted on the
door. The status of the switch is different while the door (access point) is in an open
condition.
• RTE – This zone type is used to map an uncommitted RTE zone to an alarm panel zone.
This input type is not normally used if the RTE zone is being used for a request to exit
function. The RTE device may be something as simple as a momentary contact switch or as
complex as a motion detector.
5–10
Table 5-2: Event Actions (cont'd)
EVENT EVENT
SPECIFIER DESCRIPTION
Access Point # Access Point Force Open – Access point indicated by specifier is in door
forced open alarm
Access Point # Access Point Force Open Restore – Access point indicated by specifier has
restored door forced alarm
Zone # Fire Zone – Zone indicated by specifier has gone into fire alarm
Zone # Fire Restore Zone – Zone indicated by specifier has restored its fire alarm
Zone # Burglary Zone – Zone indicated by specifier has gone into burg alarm
Zone # Burglary Restore Zone – Zone indicated by specifier has restored burg
alarm
Zone # Alarm Zone – Zone indicated by specifier has gone into alarm
Zone # Alarm Restore Zone – Zone indicated by specifier has restored its alarm
Zone # Trouble Zone – Zone indicated by specifier has gone into trouble
Zone # Trouble Restore Zone – Zone indicated by specifier has restored its trouble
Zone # Bypass Zone – Zone indicated by specifier has been bypassed
Zone # Bypass Restore Zone – Zone indicated by specifier has been unbypassed
Partition(s) Arm Stay Partition – Any partition indicated by specifier has gone into armed-
Stay
Partition(s) Arm Away Partition – Any partition indicated by specifier has gone into
armed-Away
Partition(s) Arm Instant Partition – Any partition indicated by specifier has gone into
armed-Instant
Partition(s) Arm Maximum Partition – Any partition indicated by specifier has gone into
armed-Max
VISTA User # Arm Stay User – User indicated by specifier armed a partition in Stay mode
VISTA User # Arm Away User – User indicated by specifier armed a partition in Away mode
VISTA User # Arm Instant User – User indicated by specifier armed a partition in Instant
mode
VISTA User # Arm Maximum User – User indicated by specifier armed a partition in Max
mode