Table of Contents
Advertisement
5. When the installation has completed, the installation status message page opens, as shown in
the following figure. Click Finish to complete the installation and close the installation wizard.
NOTE: After the software is installed, be sure to restart your computer before running the SMI
software.
Installation Verification
To verify the installation, navigate to the C:\Program Files (or folder C:\Program Files x86) folder. You
should see the following folders:
Accessing the SMI Software Interface
The SmartMotor Interface software (SMI software) communicates with a single or series of
SmartMotors from a Windows-based PC and gives you the capability to control and monitor the status
of the motors. The SMI software also allows you to write programs and download them into the
SmartMotor's long-term memory.
NOTE: Every SmartMotor has an ASCII interpreter built in. Therefore, it is not necessary to use the
SMI software to operate a SmartMotor.
To open the SMI software, double-click the SmartMotor Interface shortcut on the Windows desktop.
Moog Animatics Class 5 SmartMotor™ Installation and Startup Guide, Rev. I
Installation Verification
Page 30 of 76
Advertisement
Table of Contents
Need help?
Do you have a question about the SMARTMOTOR COMBITRONIC and is the answer not in the manual?