Advertisement
09.00
Dimensions
Single–surface holding brake for motors, shaft heights 100 to 160
1
Electromagnetic single–surface brake
2
Brake armature disk
3
Three Allen screws acc. to DIN 7984 or 6912
4
Special version of the outer DE bearing cover
5
Adjustment ring to adjust the air gap or as endstop for the tensioning elements
(variable for tolerance equalization)
6
Space for the tensioning element
7
Four Allen screws, M 5x15 and M 6x20
acc. to DIN 912
8
Electrical connection: Faston connector DIN 46244 A6, 3–0.8
9
Airgap s = 0.5 mm between the brake assembly and armature disk
10 Removal dimension for the Faston sleeve, size 6.3
Fig. 1-1
Mounting a holding brake on the drive end of AC motors, 1PH4 10V to 1PH4 16V as example: Mounting the
armature disk to a belt pulley with key (upper halves) or to a toothed belt pulley for tensioning elements (lower
halves)
Siemens AG 2000 All rights reserved
SIMODRIVE Planning Guide Motors (PJM) – 11.00 Edition
6SN1197–0AA20
1PH4 AC Main Spindle Motors
1.6 Options
1PH4/1-13
1PH4
Advertisement
