Advertisement
09.00
Dimension Drawings
For 1PH7 motors, the following deviations are permissible for the dimensions
specified in the following table.
Table 4-1
Note
Siemens AG reserves the right to change motor dimensions within the scope of
design improvements without prior notice. Dimension drawings can go out of
date. Up–to–date dimension drawings can be requested at no charge.
Siemens AG 2000 All rights reserved
SIMODRIVE Planning Guide Motors (PJM) – 11.00 Edition
Permissible dimension deviations
Dimension
a,b
to 250 mm
above 250 mm to 500 mm
above 500 mm to 750 mm
b
to 230 mm
1
above 230 mm
d, d
to 11 mm
1
above 11 mm to 50 mm
above 50 mm
e
to 200 mm
1
above 200 mm to 500 mm
h
above 50 mm to 250 mm
above 250 mm to 500 mm
i, i
, i
to 85 mm
1
2
above 85 mm to 130 mm
above 130 mm to 240 mm
u, t, u
, t
1
1
6SN1197–0AA20
1PH7 AC Main Spindle Motors
4 Dimension Drawings
Permissible deviations
DIN 7160
DIN 7160
DIN 747
acc. to DIN 6885 Sheet 1
4
"0.75 mm
"1.0 mm
"1.5 mm
j6
h6
j6
k6
m6
"0.25 mm
"0.5 mm
–0.5 mm
–1.0 mm
"0.75 mm
"1.0 mm
"1.5 mm
1PH7
1PH7/4-123
Advertisement
