09.00
Signal cable
The signal cable is described in the Chapter Encoders (GE).
Pre–assembled cables offer many advantages over customer–assembled ca-
bles. The cable function is guaranteed, and the high quality also results in cost
benefits.
In order to avoid the influence of noise (e.g. as a result of EMC), the signal ca-
bles must be routed separately away from the power cables.
Note
The maximum cable lengths, specified in the connetion overview, must be
observed.
Note
S
S
Siemens AG 2000 All rights reserved
SIMODRIVE Planning Guide Motors (PJM) – 11.00 Edition
General Information on AC Induction Motors
Performance and standard power and signal cables are available.
The technical data are provided in Catalog NC Z.
6SN1197–0AA20
2.2 Termination technology
ALA/2-21
ALA
J