1PH7 AC Main Spindle Motors
1.8 Options
1.8
1.8.1
1PH7
1PH7/1-22
Options
Gearbox mounting
The following prerequisites must be fulfilled in order to be able to mount ZF
changeover gearboxes onto the motors:
Shaft heights 100 to 160:
S
Type of construction IM B5, IM B35 or IM V15
S
Shaft with key and full key balancing
Shaft heights 180 and 225:
S
Type of construction IM B35
S
Bearing design for coupling drives
S
Vibration severity grade R
S
Flange and shaft accuracy R
S
Shaft with key and full key balancing
S
Degree of protection IP 55 prepared for mounting ZF gearbox
If you have any questions regarding the gearbox, then please contact ZF di-
rectly:
ZF Friedrichshafen AG
Antriebstechnik Maschinenbau
D-88038 Friedrichshafen
Telephone:
Telefax:
Internet:
(0 75 41) 77 - 0
(0 75 41) 77 - 34 70
http://www.ZF–Group.de
Siemens AG 2000 All rights reserved
SIMODRIVE Planning Guide Motors (PJM) – 11.00 Edition
09.00
6SN1197–0AA20