Nortel CS 1000 Series Installation And Commissioning Manual page 92

92 Testing ISDN BRI functions
This feature gives the calling and the called parties the option of displaying
the calling line identification as follows:
•
•
Procedure 30
Perform a Calling Line Identification Presentation test
Step
1
2
3
4
5
6
ISDN BRI Conference (National ISDN-1 and ETSI)
ISDN BRI Conference allows an ISDN BRI terminal user to bridge multiple
parties into a conversation. The user can:
•
•
•
•
Copyright © 2003-2009 Nortel Networks
.
The called party ISDN BRI terminal must have the calling line
presentation (CLIP) parameter value set to YES to accept the calling
line identification and show it on its display.
If there is an option on the ISDN BRI terminal that enables the calling
party to allow or restrict the presentation of the calling line ID on a per
call basis, select the option to allow presentation. This option on the
terminal overrides the PRES parameter values entered in the TSP
data block when configuring the TSP. This depends on the telephone
configuration default. See "TSP configuration procedures" in ISDN
Basic Rate Interface Feature Fundamentals (NN43001-580).
Action
Configure both the calling and the called party ISDN BRI terminal
DN with CLIP = YES and PRES = YES.
Place a call from one terminal to the other and observe the
display on the called party ISDN BRI terminal. The Calling Line
Identification should be displayed during ringing and for the
duration of the call.
Release the call at the called or calling party terminal.
Set PRES = NO in the TSP data block for the calling party ISDN
BRI terminal. If the calling party ISDN BRI terminal has an option
on the set to allow or restrict the presentation of the calling party
number, select the option to allow presentation and place a call
to another ISDN BRI terminal.
Observe the called party ISDN BRI terminal display. You should
see the number being displayed.
Release the call connection.
invoke Conference on a call
add a new party to an existing call
Call Join two separate parties on the terminal
disconnect from the Conference
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 03.01
11 May 2009
--End--