Nortel CS 1000 Series Installation And Commissioning Manual page 90

90 Testing ISDN BRI functions
Procedure 28
Perform a Call Waiting test
Step
1
2
3
4
5
6
7
8
9
Call Forward No Answer
Call Forward No Answer and Second Level Forward No Answer forwards
an unanswered call to a Call Forward No Answer Directory Number (DN)
after a predetermined number of rings. This feature is enabled at the TSP
level when defining the ISDN BRI DN. Both the external and internal Call
Forward No Answer features are configured at the DSL level using LD 27.
The call can be specified to be forwarded to the attendant, to an assigned
hunting DN, or to a flexible Call Forward No Answer DN by using LD 15.
When a call originated by an ISDN BRI terminal is forwarded to a
predetermined DN specified in LD 15, the display on that ISDN BRI
terminal is not updated to indicate a call modification.
Copyright © 2003-2009 Nortel Networks
.
Action
Set the FEAT parameter to HTD to disable Hunting. Use LD 27
to specify this parameter when configuring the Terminal Service
Profile (TSP) for the two voice ISDN BRI DNs on one of the
DSLs. See "TSP configuration procedures" in ISDN Basic Rate
Interface Feature Fundamentals (NN43001-580).
From an ISDN BRI terminal with disabled hunting, dial another
ISDN BRI terminal and establish an active call connection.
From the second ISDN BRI terminal with disabled hunting, dial
another ISDN BRI terminal and establish another active call
connection. Both B-channels on the DSL are now busy.
Note: Only two ISDN BRI terminals may be on the same DSL
to allow them to connect. The other two ISDN BRIs are on a
different DSL.
Place an incoming call to one of the busy ISDN BRI terminals
with disabled hunting.
Observe the called ISDN BRI terminal. The ringing or warning
tone should sound, indicating that a call is waiting.
Place the active call on hold and answer the call that is waiting.
Complete the incoming call and hang up.
Retrieve the call on hold.
Complete the call and hang up.
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 03.01
11 May 2009
--End--