Nortel CS 1000 Series Installation And Commissioning Manual page 64

64 Configuring ISDN BRI hardware
Step
1
2
3
4
5
Figure 19 "Connecting ISDN BRI terminals to the system" (page 65)
a typical DSL and multiple ISDN BRI terminals connected to the system.
Copyright © 2003-2009 Nortel Networks
.
Action
Connect system cables to the cross-connect terminal. See
Procedure 20 "Connecting system cables to the cross-connect
terminal" (page
Cross-connect the DSLs at the cross-connect terminal. See
Procedure 21 "Cross-connecting the DSLs at the cross-connect
terminal" (page
Connect the terminating resistor to the SILC DSL. See
Procedure 22 "Connecting the terminating resistor to the SILC
DSL" (page 73).
Connect the ISDN BRI terminals to the DSL. See
"Connecting the ISDN BRI terminals to the DSL" (page
Initialize the terminals. See
Networks M5317TDX terminal" (page
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 03.01
11 May 2009
65).
69).
Procedure 24 "Initializing a Nortel
--End--
Procedure 23
76).
79).
shows