The Front Panel Of The Avaya S8300B Media Server; Ports - Avaya G250 Installation And Upgrade Manual

Front panel description
You can use the ASB button on the front panel to load firmware from the bank other than the
default bank during startup:
1. Press and hold the reset button.
2. Press and hold the ASB button.
3. Release the reset button.
4. Release the ASB button.
For example, if the G250 is configured to load firmware from Bank B, use the steps listed above
to reset the G250 to load the firmware from Bank A instead.

The front panel of the Avaya S8300B Media Server

The S8300B Media Server is a Pentium-based processor that runs on a Linux operating
system. The S8300B runs Avaya Communication Manager (ACM) to provide call control
services to the G250 and other Avaya gateway devices.
The front panel of the S8300B includes:
10/100BaseT Fast Ethernet port (SERVICES)
●
Two USB ports for modem connections or the USB CD-ROM drive (USB 1 and USB 2)
●
Figure 20: The S8300B Media Server

Ports

The S8300B's 10/100BaseT Fast Ethernet port is labeled SERVICES, and is located in the
center of the front panel. The S8300B's two USB ports are labeled USB 1 and USB 2. They are
located towards the right of the front panel.
110 Installation and Upgrade for the Avaya G250 Media Gateway