Chapter 1: Introduction - Avaya G250 Installation And Upgrade Manual

Chapter 1: Introduction

This guide explains how to install and upgrade the Avaya G250 Media Gateway and contains
the following chapters:
Chapter 2: Before you
●
Chapter 3: Installing the Avaya G250 Media
●
chassis and media modules, install ground conductors and connect power to the G250.
Chapter 4: Connecting
●
G250.
Chapter 5: Connecting and enabling a modem for remote
●
connect a modem to the G250 to enable remote access.
Chapter 6: Configuring the
●
Chapter 7: After
●
Chapter 8: Upgrading media modules and
●
and devices to a G250 that is already installed.
Chapter 9: Upgrading the Avaya Communication Manager
●
upgrade the Avaya Communication Manager software that runs on the S8300B media
server.
Chapter 10: Upgrading the G250
●
Chapter 11: Upgrading IP phone configuration and firmware
●
upgrade software and firmware on IP phones.
Chapter 12:
●
Appendix A: Front panel
●
Appendix B: Technical
●
Appendix C: Running the Avaya Installation Wizard (Avaya
●
Installation Wizard, which configures a G250 with an S8300B.
Appendix D: Running the Gateway Installation Wizard
●
Installation Wizard which configures a G250 without an S8300B.
install. Describes how to prepare for an installation of the G250.
devices. Describes how to connect data and voice devices to the
G250. Describes how to configure the G250.
installation. Describes how to test an installation of the G250.
Troubleshooting. Provides basic troubleshooting information.
description. Describes the G250 chassis front panel.
specifications. Provides the technical specifications of the G250.
Gateway. Describes how to install the G250
devices. Describes how to add media modules
firmware. Describes how to upgrade the G250 firmware.
access. Describes how to
software. Describes how to
files. Describes how to
IW). Describes the Avaya
(GIW). Describes the Gateway
Issue 1.1 June 2005 17