Tftp Server Configuration - Avaya G250 Installation And Upgrade Manual

TFTP server configuration

For TFTP server configuration:
1. To configure the G250 server, clear all the boxes in the Select column and click Continue
on the Firmware page.
The TFTP Server screen appears.
2. If you want to upload configuration and firmware files for IP phones to the G350 TFTP
Server, do the following:
a. In the Server IP Address field, enter the IP address of the machine hosting the files that
are to be uploaded.
b. Select the file transfer protocol (TFTP, FTP, or SCP) you want to use to upload the files
from the host machine. TFTP is selected by default.
c. The use of the SCP protocol is limited to copying files of 1 MB or less. Therefore, an SCP
server can be used for copying the script files, which do not exceed 128 KB, but cannot
be used for copying image files.
Gateway configuration
Issue 1.1 June 2005 145