Alarm configuration
To display modem status and configure alarms:
1. Click Alarming from the main menu. The Modem Status & Configuration screen appears.
This screen detects any modem connected to the G250. The screen also displays the
results of tests performed on the modem. You can perform the following actions from this
screen:
Click Reset to reset the modem.
●
Click Refresh to re-detect and test the modem.
●
Select the appropriate modem access policy in the Modem Access area and click
●
Continue.
2. Click Continue. The OSS Configuration screen appears. Enter the required information
from the ART tool. For information on using the ART tool, see
Registration Tool (ART) for the RAS IP address
Gateway configuration
Run the Automatic
on page 22.
Issue 1.1 June 2005
161