Prepare Required Equipment; Obtain The G250 Serial Number - Avaya G250 Installation And Upgrade Manual

Before you install

Prepare required equipment

You need the following equipment to assist you in the installation:
One loop start analog trunk for connecting a modem
●
A separate telephone line, if needed, for verbal communication during remote
●
configuration
You may also need some of the following equipment for mounting the G250:
A crosspoint screwdriver if rack mounting or wall mounting the G250
●
If you will mount the G250 on a flat wall: screws to fasten the G250 to the wall
●
If you will mount the G250 on a non-flat wall:
●
- A 365 x 465 mm plywood board (US: 3/4 inch plywood), 20 mm (0.79 in) thick
- Wood screws to fasten the G250 to plywood
- Screws to fasten the plywood board to the wall
If you are installing an S8300B media server in the G250, you also need:
One USB modem. The recommended USB modem is Multitech MultiModemUSB
●
MT5634ZBA-USB-V92.
One USB CD-ROM drive.
●
A laptop computer with internet browser.
●
If you are not installing an S8300B media server in the G250, you also need:
A PC on the local network with a CD-ROM drive.
●
A laptop computer running Windows XP or Windows 2000 with a serial port recognized by
●
the operating system on the laptop. If the port is recognized, it is listed by the Device
Manager.
A modem to connect to the G250 to enable dial-in configuration. The recommended
●
modem is the serial Multitech MultiModemZBA MT5634ZBA-V-V92.

Obtain the G250 serial number

You will need the serial number for the G250 to create the customer's license file. To get this
number, look for the serial number sticker on the back of the G250 chassis. If the unit is
delivered directly to the customer and you will not have phone or LAN line access from the
customer site to access the rfa.avaya.com web site, this task will require a preliminary trip to the
customer site.
20 Installation and Upgrade for the Avaya G250 Media Gateway