Connect a modem, if necessary
If you enabled a serial modem on the G250 during your GIW session, you can now connect the
modem.
To connect a serial modem:
1. Connect the serial modem to a working telephone line.
2. Connect the provided DB-25 adapter to the modem.
3. Disconnect the flat cable from the COM port of the laptop computer.
4. Connect the flat cable to the DB-25 connector on the modem.
Test the modem connection, if necessary
If the modem is successfully initialized, the MDM LED on the G250 front panel lights. If you
connected a modem, check that the MDM LED is alight and dial into the modem to verify that
you can authenticate to the modem.
Connect a modem, if necessary
Issue 1.1 June 2005
187