National Instruments ENET-232 Series User Manual page 105

transmission line using bias resistors
(figure), 6-11
troubleshooting
common questions
Linux x86/Solaris 2.x, C-14
Windows 2000/NT 4.0, C-8
diagnostic messages, C-5
hardware problems, C-3
network problems, C-1
troubleshooting resources, F-1
two-wire devices
connecting, D-9
U
uninstalling software
Linux x86/Solaris 2.x, A-4
removing all components, C-12
Windows 2000/NT 4.0, A-1
UNIX function calls and corresponding VISA
operations (table), F-1
UNIX serial API, F-1
updating the firmware, 6-5
Linux x86/Solaris 2.x, 6-7
Windows 2000/NT 4.0, 6-6
using
CFG RESET switch, 6-3
DHCP, 6-2
other National Instruments
applications, 1-6
this manual, 1-1
© National Instruments Corporation
V
verifying
hostname, 3-7
installation, 5-1
network interface card in computer, C-5
serial device server works with your
network, C-2, C-3
TCP/IP protocol, C-5
voltage rating, 2-2
version
firmware, C-9, C-15
serial server software, C-8, C-14
VI_ATTR_ASRL_WIRE_MODE, 6-10
VISA API
comparison to UNIX serial API, F-1
VISA operations
example code, F-1, F-2
voltage rating, E-1
caution, 2-2
verifying before use, 2-2
W
Web support from National Instruments, F-1
Win16 applications
using with serial device server, C-13
Win32 Overviews and Win32 Reference, 6-1
Win32 Software Development Kit, 6-1
worldwide technical support, F-2
Index-9 ENET-232 and ENET-485 Series User Manual
Index