Installation
Installing the Serial Server Software
Windows 2000/NT 4.0
Linux x86
Solaris 2.x
© National Instruments Corporation
This chapter describes how to install the serial server software and the serial
device server.
Complete the following steps to install the serial server software for
Windows 2000/NT:
1.
Log in as
Administrator
privileges.
2.
Insert the NI-Serial Device Server Software for Windows 2000/NT CD
(or disk 1 of the floppy disk set) and run the setup program,
.
setup.exe
3.
The setup wizard guides you through the necessary steps to install the
serial server software. To exit the setup wizard at any time, click the
Cancel button.
Complete the following steps to install the serial server software on
Linux x86:
1.
Log in as
(superuser with administrative privileges).
root
2.
Insert the NI-Serial Device Server Software for Linux x86/Solaris 2.x
CD. Run the installation script
of the appropriate directory. The default installation path is
/usr/local/vxipnp/
3.
Follow any onscreen prompts.
Complete the following steps to install the serial server software on
Solaris 2.x:
1.
Log in as
(superuser with administrative privileges).
root
or as a user who has administrator
INSTALL
.
2-1
ENET-232 and ENET-485 Series User Manual
2
from the
subdirectory
VISA