National Instruments NI-9467 Getting Started
  1. Manuals
  2. Brands
  3. National Instruments Manuals
  4. Recording Equipment
  5. NI 9467
  6. Getting started

National Instruments NI-9467 Getting Started

Hide thumbs Also See for NI-9467:
Table of Contents

Advertisement

Quick Links

Download this manual
NI-9467 Getting
Started
2022-07-11

Advertisement

Table of Contents
loading

Related Manuals for National Instruments NI-9467

Summary of Contents for National Instruments NI-9467

  • Page 1 NI-9467 Getting Started 2022-07-11...

  • Page 2: Table Of Contents

    NI-9467 Specifications........

  • Page 3: Before You Begin

    Safety Guidelines for Hazardous Locations The NI-9467 is suitable for use in hazardous locations; , and hazardous locations; and nonhazardous locations only. Follow these guidelines if you are installing the NI-9467 in a potentially explosive environment. Not following these guidelines may result in serious injury or death.
  • Page 4 Each NI-9467 is marked and is suitable for use in Zone 2 hazardous locations, in ambient temperatures of -40 °C ≤ Ta ≤ 70 °C. If you are using the NI-9467 in Gas Group IIC hazardous locations, you must use the device in an NI chassis that has been evaluated as Ex nC IIC T4, Ex IIC T4, Ex nA IIC T4, or Ex nL IIC T4 equipment.

  • Page 5: Electromagnetic Compatibility Guidelines

    Furthermore, any changes or modifications to the product not expressly approved by National Instruments could void your authority to operate it under your local regulatory rules. Caution To ensure the specified EMC performance, operate this product only with shielded cables and accessories.

  • Page 6: Ni 9467 Overview

    NI-9467 Getting Started NI 9467 Overview The NI-9467 is a stationary GPS timing module for C Series platforms. It provides accurate timing and geographic location information to the C Series host, which enables synchronization of C Series systems. Start-Up Behavior At start-up, the NI-9467 automatically begins determining its location through a process known as self-survey.

  • Page 7: Connecting The Ni 9467

    Refer to the Specifications section for more details. Connecting the NI 9467 The NI-9467 has one SMA female connector on its front panel for a GPS active antenna. The connector provides a DC voltage to power the antenna and also serves as input for the GPS RF signal.

  • Page 8: Sleep Mode

    Refer to the Specifications section for more information about power consumption and thermal dissipation. Notice that when the NI-9467 is in sleep mode, the GPS receiver is not powered and stops tracking satellites. When the module exits sleep mode and power to the GPS receiver is restored, the module goes through the normal power-up process, which includes the ephemeris/almanac data acquisition and self-survey process.

  • Page 9: General Characteristics

    NI-9467 Getting Started General Characteristics Signal type L1 frequency; GPS C/A code Datum WGS-84 RF GPS signal frequency 1575.42 MHz -135 dBm to -120 dBm Recommended signal strength at SMA Max RF power at input 3 dBm Input impedance 50 Ω, nominal MTBF 2,234,702 h at 25 °C;...

  • Page 10: Physical Characteristics

    NI-9467 Getting Started Sleep mode 1 mA Thermal dissipation (at 70 °C) Active mode 550 mW maximum Sleep mode 5 mW Physical Characteristics Dimensions Visit ni.com/dimensions and search by module number. Weight 141 g (4.5 oz) Environmental Refer to the manual for the chassis you are using for more information about meeting these specifications.

  • Page 11: Safety And Hazardous Locations Standards

    30 g, 11 ms half sine; 50 g, 3 ms half sine; 18 shocks at 6 orientations Safety and Hazardous Locations Standards Note The NI-9467 module does not provide electrical isolation. This product is designed to meet the requirements of the following electrical equipment safety standards for measurement, control, and laboratory use: IEC 61010-1, EN 61010-1 ■...

  • Page 12: Product Certifications And Declarations

    NI-9467 Getting Started 2014/34/EU; Potentially Explosive Atmospheres (ATEX) ■ Product Certifications and Declarations Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for NI products, visit ni.com/product-certifications, search by model number, and click the appropriate link.

  • Page 13: Ni Services

    NI product. Product registration facilitates technical support and ensures that you receive important information updates from NI corporate headquarters is located at 11500 N Mopac Expwy, Austin, TX, 78759-3504, USA. © National Instruments © 2022 National Instruments Corporation.

Table of Contents