Table of Contents
Advertisement
L
label
figure, 2-3
information to record, 2-2
location, 2-2
LEDs
See also PWR/RDY LED
description of each (table), 1-5
Ethernet LEDs, C-4
overview, 1-4
M
missing files, C-5
multidrop network using terminating resistors
(figure), D-5
N
naming serial ports, C-10
National Instruments
Alliance Program, F-1
customer education, F-1
Developer Zone, F-1
system integration services, F-1
technical support, F-1
Web support, F-1
worldwide offices, F-2
National Instruments application software
LabVIEW, 1-6
Lookout, 1-6
Measurement Studio, 1-6
using with your serial device server, 1-7,
6-1
network administrator
assigning static IP parameters, 3-6
configuring DNS table, C-2
confirming DHCP availability, 2-4
if DHCP fails, 6-3
network cable types, 1-2, C-6, C-8
© National Instruments Corporation
network configuration mode
entering automatically, 3-1
entering manually, 3-1, 6-3
when not required, 3-1
when to use, 3-1
network problems
cannot change network settings, C-2
communication problems with other
subnets, C-3
device not shown in NI Ethernet device
configuration, C-1
DHCP does not configure network
parameters, C-1
hostname cannot access device, C-2
network settings
changing, 3-4
configuring with DHCP, 2-4
configuring without DHCP, 3-1, 3-5
determining, C-3
problems configuring, C-2
network specifications, E-2
NI Developer Zone, F-1
NI Ethernet device configuration
! shown on device listing, 3-8
accessing with CFG RESET switch, 6-3
assigning IP address manually, 3-2
busy device, 3-2, C-13, C-16
if serial device server is not
listed, C-14, C-16
network configuration mode, 3-1
possible device states, 3-2
Properties menu, 3-3
Refresh option, 3-3, C-14, C-16
starting, 3-2
troubleshooting, C-1
unconfigured device, 3-2
viewing settings in normal mode, 3-1
when to use, 2-5, 3-1
when you do not need to use, 2-5
Index-5
ENET-232 and ENET-485 Series User Manual
Index
Advertisement
Table of Contents
