Table of Contents
Advertisement
Chapter 4
Serial Port Configuration
Linux x86/Solaris 2.x
ENET-232 and ENET-485 Series User Manual
This section describes how to use VISA Configuration to view or change
the configuration of your serial ports.
1.
Run
, which is in the
visaconf
installation. A list of installed ports/devices appears.
2.
Select the port you want to configure and refer to the following
instructions:
•
To remove information about the port, click Delete.
•
To view or change the port settings, click Edit. A screen appears
that includes five serial settings: Baud Rate, Data Bits, Parity,
Stop Bits, and Flow Control. Modify these settings as required
and click OK to finish. Exit VISA Configuration. If you see the
question
Do you wish to commit all your changes to
, answer Yes.
VISA?
NIvisa
4-6
subdirectory of your
ni.com
Advertisement
Table of Contents
