Tesla RoboStar T60 User Manual page 59

6 Place the vacuum cleaner in the charging station.
7 The vacuum cleaner battery will start charging automatically.
8 While charging, the "AUTO" button blinks orange colour, while the battery is fully charged, the
"AUTO" button lights up in a green color.
9 Before putting the vacuum cleaner into operation, prepare the room so there are no objects on
the floor that may prevent the vacuum cleaner to operate properly (bigger sheets of paper,
cables, stickers, small items, inappropriately placed carpet, etc.).
10 Remove the chairs and other larger items so the vacuum cleaner can easily reach inaccessible
places.
11 Switch the ON/OFF button („2") on the on the vacuum cleaner to the ON "
12 Press the "AUTO" button on the vacuum cleaner or on the remote control button "7" to place the
unit in "Standby mode".
13 To start up, press again the "AUTO" button on the top of the device or the button "7" on the
remote control.
14 To stop/pause the vacuum cleaner, press the "AUTO" button on the top of the appliance or the
"7" button on the remote control.
15 If the vacuum cleaner is stopped for more than 45 seconds, it automatically switches to "Sleep"
mode to save the battery. The "AUTO" button on the robot will not blink and the buttons on the
remote control will not respond. To wake up the vacuum cleaner press the "AUTO" button on
the top of the device or push button "7" on remote control.
Turn ON
switch the switch to ON ( I ), the "AUTO" button
on the vacuum cleaner lights up in green.
Turn OFF
switch the switch to OFF (
o
).
o
" position."