Remote Control - Tesla RoboStar T60 User Manual

REMOTE CONTROL

1 The "CLEAN" (2) button
 Start/Stop in "SMART" cleaning mode using gyroscopic navigation.
2 Directional buttons (5) and "MAX" button
Button : to increase the time value for the schedule cleaning and time setting
Button : a directional button to move forward
Button „MAX" : to decrease the time value for the schedule cleaning and time setting
Button „MAX" : a directional button to move backward
Button : to switch from setting the minutes to setting the hours for a schedule cleaning and
time setting
Button : a directional button to move to the left
Button : to switch from setting the hours to setting the minutes for a schedule cleaning and
time setting
Button : a directional button to move to the right
3 The "PLAN" (4) button
 Enter the "Schedule Cleaning" mode, use the directional buttons at the top half of the remote
control display (HH: MM) to set the start for the schedule cleaning.
 Push the button again to confirm the "Scheduled Cleaning".
4 The "CLOCK" (9) button

Enter the "Time Setting" mode, use the directional buttons (HH: MM).

Push the button again to confirm the set time.
5 The "HOME" (6) button
 Push to command the vacuum cleaner to search for the charging station and start charging.
6 The "SPOT" (5) button

Push to command the vacuum cleaner to start cleaning in circles - targeted cleaning.
7 The "AUTO" (7) button
 Push to command the vacuum cleaner to start automatic cleaning
8 The "MAX" (8) button
 Push to increase the suction power of the vacuum cleaner to the maximum power for deep
cleaning. This mode is used for larger floor contamination or thorough carpet cleaning.