Tools - Fein ABS 9 Manual

FEIN - Repair - Tool
4.5.2. Joining motor housing,
! Set the adjustment ring to the middle position before installing !
1. Place the wired drive unit
in the housing (10) (observe attachments and squeezing points).
2. Place the right / left switching slide
3. Place the housing cover
1.
(20,30,40,50) with the switching unit (60) and the terminal strip
(61) and the eye for the wrist strap (80).
(10) and screw down with 0.6-0.8 Nm.
Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtsanmeldung.
Jede Verfügungsbefugnis wie Kopieren und Weitergaberecht liegt bei FEIN.
ABS 9
3.
(11)
Tool:
•PH2 cross-slotted
screwdriver
•Cable hook
MVK 11 / 02