Siemens SINAMICS S120 Commissioning Manual page 288

Diagnostics
3.2 Diagnostics via STARTER
Parameterizing and using the measuring sockets
The measuring sockets are parameterized and operated via the STARTER commissioning
tool. You can access the operating window for the measuring sockets in the project window
under "Control Unit" > "Inputs/outputs". In the inputs/outputs window, click on the "Test
sockets" tab.
Figure 3-8 "Measuring sockets" initial screen
Note
You can find additional information on parameterizing and operating in the online help.
286
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
Commissioning Manual