Siemens SINAMICS S120 Commissioning Manual page 89

What?
2.1 Selecting the
access point
2.2 Selecting the
PG/PC interface
Commissioning Manual
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
How?
The target device can be accessed using STARTER or via STEP 7.
1. For step 2, click on "Access point".
2. Select the access point for the accessible nodes.
In this window, the interface can be selected, set and tested.
1. For step 2, click on "PG/PC".
2. Select the "Access point of the application" and therefore also the interface parameter
assignment.
If the desired interface does not yet exist in the selection list, you can create additional
interfaces using the "Select" button.
2.3 Creating a project in the STARTER commissioning tool
Commissioning
87