Identification; Order Code Of Temposonics ® Rp - MTS Sensors Temposonics Powerlink V2 R Series Operation Manual

3. Identification

3.1 Order code of Temposonics
1 2 3 4 5 6
R P
a b c
a Sensor model
P Profile
R
b Design
G Magnet slider, joint on top, backslash free (part no. 253 421)
M U-magnet, OD33 (part no. 251 416-2)
S Magnet slider, joint on top (part no. 252 182)
V Magnet slider, joint at front (part no. 252 184)
c Stroke length
X X X X M 0025...5080 mm
Standard stroke length (mm)*
25...500 mm
500...2500 mm
2500...5080 mm
X X X X U 001.0...200.0 in.
Standard stroke length (in.)*
1...20 in.
2...100 in.
100...200 in.
d Connection type
6 2 × M12 female connectors (4 pin),
D 5
1 × M8 male connector (4 pin)
e Operating voltage
1 +24 VDC (−15 / +20 %)
f Output
U 3 0 1 Powerlink V2
*/ Non standard stroke lengths are available; must be encoded in 5 mm / 0.1 in. increments
3/ Note: Specify magnet number for your sensing application and order separately
RP
®
7 8 9 10 11 12
1
D 5 6
d e
Ordering steps
25 mm
50 mm
100 mm
Ordering steps
1 in.
2 in.
4 in.
13 14 15 16 17 18 19
1
U 3 0
g
f
optional
Optional:
g Magnet number for multi-position measurement
Z 0 2 2 magnets
Z 0 3 3 magnets
Z 0 4 4 magnets
I 5 I
Temposonics R-Series Powerlink V2
®
Operation Manual
3