MTS Sensors Temposonics Powerlink V2 R Series Operation Manual page 31

6.1.2 Network adapter set-up
 Step 1: Network adapter set-up
 Step 2: Node ID configuration
 Step 3: Process data
1. Open the "Control Panel" > "Network and Internet" >
"Network Connections" (Fig. 46).
Fig. 46: Network Connections
2. Double click the LAN card which is connected with the sensor.
A menu will open (Fig. 47).
Fig. 47: LAN connections
3. Disable "Internet Procotol Version 6 (TCP/IPv6)" (Fig. 48).
Fig. 48: Disable TCP/IPv6
4. Choose "Internet Procotol Version 4 (TCP/IPv4)"
and click "Properties" (Fig. 49).
Fig. 49: Choose TCP/IPv4
I 31 I
Temposonics R-Series Powerlink V2
®
Operation Manual