Table of Contents
Advertisement
Temposonics
R-Series Powerlink V2
®
Operation Manual
8.6 Variable watch after successful execution of the
implemented state machine
As shown in the variable watch the LossSoC threshold value has
been changed from 15 (default value) to 23 (recommended value
for Powerlink networks with media redundancy).
Fig. 76: Variable watch
9. Maintenance and troubleshooting
9.1 Error conditions, troubleshooting
See chapter "5. Operation" on page 30.
9.2 Maintenance
The sensor is maintenance-free.
9.3 Repair
Repairs of the sensor may be performed only by MTS Sensors or
a repair facility explicitly authorized by MTS Sensors.
10. Removal from service / dismantling
The product contains electronic components and must be disposed
of in accordance with the local regulations.
9.4 List of spare parts
No spare parts are available for this sensor.
9.5 Transport and storage
The conditions of transport and storage of the sensor match the
operating conditions mentioned in this document.
I 46 I
Advertisement
Table of Contents
Need help?
Do you have a question about the Temposonics Powerlink V2 R Series and is the answer not in the manual?