Nt (Network Discovery Back-Off); Network Discovery Options); Ci (Cluster Id) - Digi XBee DigiMesh 2.4 User Manual

AT commands
Default
0x20 (an ASCII space character)

NT (Network Discovery Back-off)

Sets or displays the network discovery back-off parameter for a device. This sets the maximum value
for the random delay that the device uses to send network discovery responses.
The ND, DN, and FN commands use NT.
Parameter range
0x20 - 0x2EE0 (x 100 ms)
Default
0x82 (13 seconds)
NO (Network Discovery Options)
Set or read the network discovery options value for the ND (Network Discovery) command on a
particular device. The options bit field value changes the behavior of the ND command and what
optional values the local device returns when it receives an ND command or API Node Identification
Indicator (0x95) frame.
Use NO to suppress or include a self-response to ND (Node Discover) commands. When NO bit 1 = 1, a
device performing a Node Discover includes a response entry for itself.
Parameter range
0x0 - 0x7 (bit field)
Bit field
Option Description
Append the DD (Digi Device Identifier) value to ND responses or API node identification
0x01
frames.
Local device sends ND response frame out the serial interface when ND is issued.
0x02
Append the RSSI of the last hop to ND, FN, and responses or API node identification
0x04
frames.
Default
0x0

CI (Cluster ID)

XBee/XBee-PRO DigiMesh 2.4
The application layer cluster ID value. The device uses this value as the cluster ID for all data
transmissions.
If you set this value to 0x12 (loopback Cluster ID), the destination node echoes any transmitted
packet back to the source device.
XBee/XBee-PRO DigiMesh 2.4 RF Module User Guide
Addressing commands
81