Table of Contents
Advertisement
Work with networked devices
Monitor I/O lines
Pin command parameter
0
1
2
3
4
5
6-9
The following table provides the pin configurations when you set the configuration command for a
particular pin.
Device pin name
CD / DIO12
PWM0 / RSSI / DIO10
PWM1 / DIO11
DTR / SLEEP_RQ / DIO8
AD4 / DIO4
CTS / DIO7
ON/ SLEEP / DIO9
ASSOC / AD5 / DIO5
RTS / DIO6
AD3 / DIO3
AD2 / DIO2
AD1 / DIO1
AD0 / DIO0 / Commissioning Pushbutton
Use the PR command to enable internal pull up/down resistors for each digital input. Use the PD
command to determine the direction of the internal pull up/down resistor.
Queried sampling
You can use the IS command to query the current state of all digital input and ADC lines on the device.
If no inputs are defined, the command returns with an ERROR.
XBee/XBee-PRO DigiMesh 2.4 RF Module User Guide
Description
Unmonitored digital input
Reserved for pin-specific alternate functionality
Analog input (A/D pins) or PWM output (PWM pins)
Digital input, monitored
Digital output, low
Digital output, high
Alternate functionality, where applicable
Device pin number
4
6
7
9
11
12
13
15
16
17
18
19
20
Monitor I/O lines
Configuration command
P2
P0
P1
D8
D4
D7
D9
D5
D6
D3
D2
D1
D0
48
Advertisement
Table of Contents
