Notes For The User; Information About The Product; Warranty; Contact Data - HellermannTyton Autotool 2000 CPK Operating Instructions Manual

1

Notes for the user

These Operating Instructions are very important for
correct use of the device.
They contain important information and safety
instructions that will enable you to utilise the product
correctly and economically for its intended use.
The instructions help avoid hazards, reduce repair costs
and downtimes, and enhance the dependability and
durability of the device.
Non-compliance of any nature whatsoever can lead to
accidents with fatal consequences, injury or damage to
property.
1 .1

Information about the product

Product designation: AT2000 CPK
Article number: 106-00000
1 .2

Warranty

The warranty is in accordance with statutory require-
ments. Warranty entitlement applies only in the country
in which the device was originally purchased.
Batteries, fuses and light sources are not covered by the
warranty.
1 .3

Contact data

The manufacturer of the product described in these
Operating Instructions is:
HellermannTyton GmbH
Grosser Moorweg 45
D-25436 Tornesch, Germany
Tel. +49 4122 701-0
www.HellermannTyton.de
info@HellermannTyton.de
1 .4

Information about these Operating Instructions

Last change: 20.11.2019
1 .5 Copyright and intellectual property rights
The manufacturer retains the copyright to these
Operating Instructions. Under no circumstances may
these instructions be reproduced or electronically
processed, replicated or disseminated, in whole or in
part, without the prior written consent of
HellermannTyton GmbH (hereinafter referred to as
HellermannTyton). Any breach or infringement of these
stipulations will result in liability for damages.
Operating Instructions • AT2000 CPK • 07-2019 • v03 • 106-29004
1 .5 .1 Keeping and dissemination of the Operating
Instructions
These Operating Instructions must be kept in the
immediate vicinity of the workplace and must be
available at all times to all operating personnel. The
operating company shall inform the operating personnel
of the location of these Operating Instructions.
The operating company shall obtain replacement from
the manufacturer if these instructions are, become or are
rendered no longer easily legible.
If the device is acquired by or sold on to a third party the
following documents must be handed over to the new
owner:
• Operating Instructions
• Documents relating to repair work
• Logs of maintenance work undertaken
f Protect these Operating Instructions from moisture,
direct sunlight and extreme heat.
1 .6

Target group of these Operating Instructions

These Operating Instructions must be read and complied
with by every person charged with any of the following
tasks:
• Installation
• Operation
• Maintenance
• Repair
• Fault rectification
1 .7

General information

Subject to technical modifications.
Notes for the user
5