Changing Back-Up Battery; Maintenance; Important Notes; Accessories And Extras - HellermannTyton Autotool 2000 CPK Operating Instructions Manual

f Turn the drum past the point of indexing resistance
5
and remove the cable-tie residues.
f Close the left and right service flaps.
f Switch the power pack ON.
f Close the gate.
f Load a new cable tie bandoleer, à "Loading cable ties"
on page 11.

10 .4 .2 Changing back-up battery

DANGER
A hazardous electrical current flows though the body
in direct or indirect contact with electrically live parts .
Electric shock, burns or death can result.
f Work on the electrical supply and on parts that are live
when the device is in operation should always be carried
out by a trained electrician.
f Use only OEM fuses of the specified amperage.
f Have faulty electrical components replaced immediately.
f Always disconnect the plug from the power-supply outlet
before starting maintenance work and troubleshooting.
f Check the electrical equipment of the device at regular
intervals. Have defects such as loose connections or
scorched wiring repaired immediately.
f Switch the power pack OFF.
f Disconnect the power cord from the power-supply
outlet.
1
P o
w e
r p
a c
k C
P K
2
D a
ta
S ig
n a
l
P o
w e
r
f Remove the cover screws
f Remove housing from the power pack.
2
Operating Instructions • AT2000 CPK • 07-2019 • v03 • 106-29004
5
1
.
1
f Change back-up battery
For details of battery type, à "Power pack CPK" on
page 38
f Position the housing and affix using the cover
2
screws .
1
f Set the date and time, à "Date / time" on page 16.
11

Maintenance

11 .1 Important notes

Regular servicing is essential in order to ensure that the
device remains in safe working order, à "Maintenance
schedule" on page 35.
CAUTION
Crush hazard when jaws close .
f Do not insert fingers between upper and lower jaws and
do not keep your finger on the trigger.
f Always keep the power pack switched OFF while
maintenance is in progress.
CAUTION
Crush hazard due to moving/rotating parts when service flaps
are open.
f Do not insert fingers underneath the drum and do not
keep your finger on the trigger.
f Always keep the power pack switched OFF while
maintenance is in progress.

11 .2 Accessories and extras

Accessories and extras can be ordered directly from your
national HellermannTyton representative, à separate
spare parts list.
Name
Power pack CPK
Bench mount kit CPK
Overhead suspension CPK
CPK safety warnings
Power cable, 1 .8 m
Connecting cable, 2 m
Maintenance
.
3
Article number
106-00100
106-00040
106-00050
106-29003
123-90040
123-90052
3
34