Parameter Set Menu; Synchronise Parameter Sets - HellermannTyton Autotool 2000 CPK Operating Instructions Manual

9 .8

Parameter set menu

The settings for a binding process (e.g. force level,
quality, diameter and projecting cable-tie ends) are
grouped in the Parameter sets
accessed and managed as a setting.
The Parameter set menu appears only if the user has logged
on with the setup specialist's password.
2
1 Overview of the parameter sets
2 Data synchronisation with the AT2000 CPK
3 Send configured parameter sets to the AT2000 CPK
4 Save parameter sets
5 Load parameter sets
Operating Instructions • AT2000 CPK • 07-2019 • v03 • 106-29004
menu and can thus be
3 4
1
5

9 .8 .1 Synchronise parameter sets

f Click on Fetch data from tool
; The parameter sets of the AT2000 CPK are loaded and
displayed.
Data changed in the AT2000 CPK is indicated with an *.
f Edit the parameter sets, à "Edit parameter sets" on
page 28.
f Click on Send data to tool
; The parameter sets are transmitted to the AT2000 CPK.
HT Data Management
6
.
2
.
3
27